Optimal security for your motorhome or commercial vehicle. This set of side locks is mounted without drilling on the existing attachment points of the armrest. Delivery as a set of 2 locks.
Locks with rotary knob, applicable to Fiat Ducato / Citroën Jumper / Peugeot Boxer from the X250 series (2006 - 2021). Also suitable for the models from the X290 and X295 series (2014 - 2021).
This set is suitable for the X250 series (Fiat Ducato and similar) pre facelift from 2022, from 2022 other armrests have been mounted in the cabin.
Product information
- supplier: HEOSolution
- supplier's article number: 12646
- barcode (EAN): 4260361070050
- delivery as a set of 2 locks, including installation instructions and mounting materials
- housing colour: black (textured)
- color knob: white
- mounting level: advanced
- packing: box
- own weight: 0.52 kg. (set)
User manual
> press control button
> lock or unlock the cabin door by turning the operating knob
> finally release the button, the lock will lock automatically in this position
Assembly instructions
> remove the cover on the corner of the armrest
> remove the visible screw (Torx TX30)
> detach the base plate of the HEOSafe lock (attention, loose parts)
> fix the base plate to the door using the supplied M6 x 30 allen bolt
> slide the lock over the base plate, paying attention to the correct fit, then screw in both screws
> attach the lock to the armrest by first drilling a 2mm hole in the plastic and then tightening the screw
> press the door seal on the B-pillar together at the height of the bolt
blackout curtains
> the 12656 & 12646 locks from HEOSafe have been developed in such a way that they can be used in combination with a rollo (blackout curtain) from Dometic, Remis or others. In some cases, the finishing cap of the blackout curtain must be adjusted for a correct fit. A free mounting template for Remis blackout is included for easy mounting. In the case of Dometic blackout, it is best to contact us for a brief explanation.
Installation instructions for Dometic SP300 blackout
With the Dometic SP300 shade, the mounting hole for the plastic frame is exactly on the line of the saw jig. The shade cover is usually cut off below this mounting hole.
If there is play, move the shade up slightly to maintain the entire recess of the mounting hole before making the cut. If this space is not available, leave at least part of the recess, so that the screw has sufficient hold when clamping the frame.
The cap of the screw will also have to be adjusted, use sandpaper or a file for this. Then glue the cap back into the recess.
